AU61021
New product
MaxiScope MP408
The MaxiScope MP408 is a PC based 4-channel automotive oscilloscope. It works in combination with your PC or MaxiSys Tablet, which turns into a powerful diagnostic tool, providing you an insight to the inner workings of a vehicle’s electronic circuits. Featuring the user-friendly UI design combined with the unrivalled hardware specs.
Features
Specification
Vertical resolution |
12 bits |
Channels |
4 |
Bandwidth |
20MHz |
Accuracy |
1% |
Sensitivity |
10mV/div to 20V/div |
PC Interface |
USB 2.0 – Cable supplied |
Power Requirements |
Powered from USB port |
Input Ranges (full scale) |
±v50mV to ±100V in 11 ranges |
Input Impedance |
1MΩ in parallel with 22pF |
Input Type |
Single-ended, BNC connector |
Input Coupling |
Software selectable AC/DC |
Overload Protection |
±200V on single input |
Buffer Memory |
32M samples shared among active channels |
Waveform Buffer |
Up to 1000 waveforms |
Timebase Ranges |
100ns/div to 1000s/div |
Operating Temperature Range |
0°C to 50°C (15°C to 40°C for quoted accuracy) |
Storage Temperature Range |
-20°C to +60°C |
Storage Humidity Range |
5% to 95%RH, Non-condensing |
Dimensions |
190X115X38mm |
Weight |
< 0.5kg |
Maximum Sampling Rate (Single Shot) |
|
1 or 2 channels in use |
80MS/s |
3 or 4 channels in use |
20MS/s |
Accessories
Product Display
MaxiScope App Installation Instructions (only for android)
Download (114.57k)